Universal
Showing all 36 resultsSorted by latest
-
Head Self Feed Nylon
Quick ViewPart Number: 02573
Fits: Tap-N-Go double line head. Innovative line loading system. Suitable for all straight shaft brushcutters 33cc & over. Will take round or square line up to 4mm diameter.
M10 x 1.25 LHF & M8 x 1.25 LHM adaptors included.
OEM:
Size: Head Diameter 130mm. -
Blade Support
Quick ViewPart Number: 55038
Fits: Straight shaft Brushcutters.
Replaces OEM:
Size: Dia 82mm x 10mm bore -
Blade Support
Quick ViewPart Number: 55037
Fits: Straight shaft Brushcutters.
Replaces OEM:
Size: Dia 82mm x 12mm bore -
Oil
Quick ViewPart Number: 0814
Fits:Airline Oil. Recommended for use in air tools of most types including Road Drills, Jack Hammers, Air Speed Saws and Torque Wrenches. (Mineral).
1 Litre. -
Ignition Spark Tester
Quick ViewPart Number: 01530
Fits: Spark Check’r for most 2 & 4 stroke engines, with or without CDI electronic ignitions.
Replaces OEM: -
2 Stroke Mixing Bottle
Quick ViewPart Number: 01545
Fits: Fuel mixing container. For mixing oil with fuel at 25:1 & 50:1 ratios. -
Wheel
Quick ViewPart Number: 62044
Fits: Wheelbarrows, Trolleys and Carts. Maximum inflation – 35 PSi advised. Not for highway use.
Replaces OEM:
Size: Wheel Width: 3″(75mm), Wheel Diameter: 10″(250mm). Axle bore length 50mm, Axle bore diameter 16mm. Load Bearing capacity 120KG -
Wheel
Quick ViewPart Number: 62042
Fits: Wheelbarrows, Trolleys and Carts. Complete with axle set. (130mm bolt.) Maximum inflation – 35 PSi advised. Not for highway use.
Replaces OEM:
Size: 14″(360mm) x 3″(75mm) 4.00-8. Centre hole 25.4 mm (1″) diameter. -
Tyre & Inner Tube
Quick ViewPart Number: 62043
Fits: Standard 4″ Rim, Maximum inflation – 35 PSi advised, Schrader valve. Not for highway use.
Replaces OEM:
Size: 4.10/3.50-4 -
Tyre & Inner Tube
Quick ViewPart Number: 62041
Fits: Standard 9″ Rim, Maximum inflation – 35 PSi advised, Schrader valve. Not for highway use.
Replaces OEM:
Size: O/D 16″ (400mm), Tyre width – 4″ (100mm) 4.00-8 -
Tyre & Inner Tube
Quick ViewPart Number: 62040
Fits: Standard 8″ Rim, Maximum inflation – 35 PSi advised, Schrader valve. Not for highway use.
Replaces OEM:
Size: O/D 14″ (360mm), Tyre width – 3.5″ (90mm) 3.50-8 -
Brushcutter Head
Quick ViewPart Number: 02589
Fits: Brushcutter Head Nylon.
Replaces OEM:
Size: Dia 200mm, Centre Hole 25.4mm -
Lever
Quick ViewPart Number: 53373
Fits: Clutch / Brake Lever with automatic stop for various models.
Size: Tube Diameter 25mm, 200mm long. -
Lever
Quick ViewPart Number: 53372
Fits: Clutch / Brake Lever with automatic stop for various models.
Size: Tube Diameter 22mm, 200mm long. -
Wing Nut & Bolt
Quick ViewPart Number: 16085
Fits: Triangular head wing nut & bolt for lawnmower handles. Universal fitting.
Replaces OEM:
Size: 8mm Thread. Knob diameter 60mm. 33mm deep -
Wing Nut & Bolt
Quick ViewPart Number: 16075
Fits: Triangular head wing nut & bolt for lawnmower handles. Universal fitting.
Replaces OEM:
Size: 8mm Thread. Knob diameter 60mm. 24mm deep -
Cable Inner
Quick ViewPart Number: 02992
Fits: Replacement inner cable with round nipple For throttle cable and clutch cable repairs.
Size; 3 Metre X 1.9mm -
Cable Inner
Quick ViewPart Number: 02993
Fits: Replacement inner cable with round nipple For throttle cable and clutch cable repairs.
Size; 2.5 Metre X 1.9mm -
Cable Inner
Quick ViewPart Number: 02994
Fits: Replacement inner cable with round nipple For throttle cable and clutch cable repairs.
Size; 2 Metre X 1.9mm -
Cable Inner
Quick ViewPart Number: 02991
Fits: Replacement inner cable with round nipple For throttle cable and clutch cable repairs.
Size; 1.75 Metre X 2.5mm -
Cable Inner
Quick ViewPart Number: 02995
Fits: Replacement inner cable with round nipple For throttle cable and clutch cable repairs.
Size: 1 Metre X 1.9mm -
Durafix Head Pegged
Quick ViewPart Number: 02598
Fits: Universal 2 line Brushcutter manual feed head. Fits most straight shafts. Fits on standard square head adaptor bolts. -
Head Steel Wire
Quick ViewPart Number: 02582
Fits: Weed brush suitable for most trimmer models and straight-shaft garden pole tools.
Size: 8″ Diameter with 1″ centre hole. -
Head Steel Wire
Quick ViewPart Number: 02581
Description: Weed brush suitable for most trimmer models and straight-shaft garden pole tools.
Size: 6″ Diameter with 1″ centre hole. -
Jerry Can Spout Rubber Seal
Quick ViewPart Number: 70211A
Seal Only
Size: Thickness 4.8mm -
HT Lead
Quick ViewPart Number: 3955
Fits: Copper core ignition lead suitable for many applications.
Replaces OEM:
Size: Diameter 5mm, Length 10 Metres -
Criss Cross Gloves
Quick ViewPart Number: 70605
Knitted cotton gloves with criss-cross non slip grip and elasticated wrists. Provides excellent grip in any conditions. -
Compactor Mounting Rubber
Quick ViewPart Number: 03489
Fits: Universal compactor mounting rubber to fit many compactors. Straight through 10mm bolt.
Size: Thread extends 28mm each side from rubber.
Rubber is 60mm in diameter.
Thickness of rubber is 40mm. -
Engine Mounting Rubber
Quick ViewPart Number: 03493
Fits: Universal engine mounting rubber to suit a variety of frame mounted units straight through 8mm bolt type.
Size: Thread extends 17mm & 17mm from rubber.
Rubber is 40mm in diameter.
Rubber is 30mm thick. -
Engine Mounting Rubber
Quick ViewPart Number: 03492
Fits: Universal engine mounting rubber to suit a variety of frame mounted units straight through 8mm bolt type.
Size: Thread extends 15mm & 42mm from rubber.
Rubber is 40mm in diameter.
Rubber is 25mm thick. -
Jerry Can Spout
Quick ViewPart Number: 70210
Fits: Universal Jerry Can spout, fits all sizes (not premium). Red. -
Jerry Can
Quick ViewPart Number: 70208
Fits: Heavy Duty Jerry Can. Made from 0.6mm thickness Steel. Red.
Size: 20 litre -
Jerry Can
Quick ViewPart Number: 70207
Fits: Heavy Duty Jerry Can. Made from 0.6mm thickness Steel. Red.
Size: 10 litre -
Jerry Can
Quick ViewPart Number: 70206
Fits: Heavy Duty Jerry Can. Made from 0.6mm thickness Steel.
Size: 5 litre -
Head Bump Feed c/w Adaptor Bolts
Quick ViewPart Number: 02596
Fits: Universal 2 line Brushcutter Bump Feed Head to fit most straight shafts.
Adaptor Bolt Sizes:
8mm x 1.25mm Left hand female
10mm x 1.25mm Left hand female
10mm x 1.25mm Left hand male
10mm x 1.00mm Left hand female
7mm x 1.00mm Left hand male -
Cable with Z end
Quick ViewPart Number: 73092
Fits: Inner cable with Z end.
Replaces OEM:
Size: Length: 2 metre Cable Dia 2.1mm